Portable Diesel Fuel Pump

This pump is used for transferring fluids from one location to another, for example when draining a fuel tank or transmission fluid. This would also be ideal when completing oil changes when the drain plug is difficult to reach

This pump operates by using a 12V DC motor which is fully sealed in a steel casing which is 50MM in diameter and 135MM long, power is supplied by attaching the crocodile clips to either a battery or generator. When in use, the motor runs at 8500 RPM and transfers fluids at a rate of up to an amazing 30 litres per minute.

When required a 19MM tube is to be securely attached to the outlet port (tube not included), before the pump is dropped into the fluid. The pump is then turned on using the switch which is on the 3 meter long cable.

When you have finished using the pump, always ensure that it is cleaned thoroughly to prevent cross contamination of fluids.