Voltage - 12V DC

Open Flow Rate - 350 Gallons Per Hour

Max Head Lift - 2.5 Metres

Amp's - 1.0, Fuse - 2.0 Max

Outlet DIA / Hose - 19MM

Outlet Fittings - 1: Straight & 1: 90 Degree Bend

Inlet Shaft (DIA x Height) - 26MM x 122MM

Overall Height - 240MM

Connection Wires (Positive & Negative) - 1 Metre

This Compact, Efficient Pump Features A Heavy Duty Motor With Stainless Steel Shafts And Tough Thermoplastic Bodies. They Are Totally Submersible, Ignition Protected And Made To All Existing Safety Standards And CE Certifications So You Can Be Sure Of Maximum Safety. The Motors Are Water Cooled For Long Life With An Anti-Airlock Design And Moisture Tight Seals With A No Burn Out If Run Dry. The Strainer Bases Are Snap-Lock For Easy Installation And Removal When Cleaning.

These Pumps Are Used For Pumping Sea Water Directly Into Your Live Bait Well Tank. This Particular Pump Is A Cartridge Pump So The Motor Can Be Removed Without The Need For Removing All The Fittings And Installation. This Particular Pump Has A Straight Inlet Entry.

The Water Does Need To Be Inside The Pump At The Impeller To Effectively Pump The Water

Max Head Stated Is When Using The Above Outlet Hose Size, Using A Smaller Hose Size Will Increase Max Head Lift

THESE ARE ONLY DESIGNED FOR USE AS A LIVE BAIT WELL PUMP

Colours May Vary To Picture, Specifications Will Be The Same

Please Note We Supply A Huge Variety Of Marine And Yachting Equipment

*** Free Delivery ***

Product Code - SFBPA03