Submersible Bilge Pump
Voltage - 12V DC
Open Flow Rate - 350 Gallons Per Hour
Max Head Lift - 2.5 Metres
Amp's - 1.8, Fuse - 4.0 Max
Outlet DIA / Hose - 19MM
Height x Base Width - 107MM x 63MM
Connection Wires (Positive & Negative) - 1 Metre
This compact, efficient pump features a heavy duty motor with stainless steel shafts and tough thermoplastic bodies. They are totally submersible, ignition protected and made to all exisisting safety standards and CE certifications so you can be sure of maximum safety. The motors are water cooled for long life with an anti airlock design and moisture tight seals with a no burn out if run dry. The strainer bases are snap-lock for easy installation and removal when cleaning.
Max Head Stated Is When Using The Above Outlet Hose Size, Using A Smaller Hose Size Will Increase Max Head Lift
THESE ARE ONLY DESIGNED FOR USE IN THE BILGE OF A BOAT
Colours May Vary To Picture, Specifications Will Be The Same
Auto Float Switch
Suitable For - 12V, 24V, 32V Applications
Wire Size x Length - 16 Gauge x 28 Inch
Activates Bilge Pump - 50MM Of Water
De-Activates Bilge Pump - 19MM Of Water
Base Size - 66MM x 44MM
These auto float switches are used for automatically turning on and off bilge pumps. These help to reduce wear on the bilge pump but will also pro long the battery as it isnt in constant use. This model has a detachable base for easy cleaning and maintanence. This float switch does not contain any Mercury.
Always use the correct fuse for the voltage that this float switch is used for. This is not to be used with 110V applications.
Please Note We Supply A Huge Variety Of Marine And Yachting Equipment
Product Code - SFBP03/SFAFS
